Aastra dect basisstation RFP 43 WLAN

350.00 [ 423.50 incl. BTW ]

1 op voorraad

Artikelnummer: 2101 Categorieën: ,


Aastra dect basisstation RFP 43 WLAN

Highlights of the RFP 43 WLAN
RFP 43 WLAN off ers – due to integrated IEEE 802.11n compatible WLAN Access Point – signifi cant advantages compared to a separat infrastructure for DECT and WLAN:
• Only one access point for both technologies (DECT and WLAN)
• Only one switch-port is required (PoE recommended)
• Integrated, centralized management and set up for DECT and WLAN
• Net View Management:
* RFP 43 WLAN Access Points can be grouped in clusters
* The WLAN-properties within one cluster can be managed for all access points simultaneously
* It is not required to administer the access points individually
Additionally RFP 43 permits
• Easy installation due to preinstalled software
• Simultaneous use as OpenMobilityManager (OMM) in the network


• All 120 DECT channels supported for maximum use of the DECT capacity
• 8 simultaneous voice channels per DECToverIP base station, 4 additional channels for handover
• Synchronisation of the RFPs via DECT radio interface
• GAP standard supported (incl. connection handover)
• DSAA authentication between base and handset
• Support of DECT encryption
• Cordless system telephones can use all system features offered by OpenCom 100, 1000 and SIP-DECT
• Antenna diversity
• DECT XQ to guarantee good speech quality in reflecting environments

• VoIP connection using RTP/RTCP protoco
• G.711 / G.723.1 / G.729AB codec1 depending on required voice quality and available bandwidth
• Quality of service supported by Diffserv / ToS Flag
• Adaptive jitter compensation
• Echo cancellation / suppression
• Voice activity detection and comfort noise generator

• BaseT connection via Ethernet 10 / 100 / 1000 Mbit
• Optional SNMPv1/v2c, MIB II, read only, support of traps
• Support of VLANs (virtual LANs)

WLAN Access Point
• Support of
* IEEE 802.11n (2.4 and 5 GHz, MIMO 2T/2R)
* IEEE 802.11a
* IEEE 802.11b/g
• Adjustable transmission power level for easy network planning
• Central service interface for all WLAN Access Points
• 802.11d Multiple Regulatory Domains, enabling country specific WLAN channel selection
• Wireless Multimedia Extensions (WME) for quality of service

Security Features
• Wired Equivalent Privacy (WEP), set able for 64-, 128- and 256-bit encryption
• WPA1 (Wi-Fi Protected Access) encryption2
• WAP2 with asymmetric encryption
• Authentication of stations with RADIUS 802.1x server
• White list for allowed WLAN stations for up to 64 MAC address entries
• 64-entry associated stations list
• Hidden Service Set Identifier (SSID)
• Multiple BSSID (Basic Service Set Identifier) enables four parallel WLAN networks within

Service and Installation
• 4 LEDs signalling the current state of operation
• Central configuration via web configurator
• Central system journal
• Central cluster administration
• Wiring alternatively from below (cable duct) or from above (suspended ceiling)

Technical Data
• Internal antennas for DECT, 2.4 GHz WLAN and 5 GHz WLAN
• Power supply:
* Power over Ethernet IEEE 802.3af, class 0 or
* 230 V AC-adapter
• USB 2.0 host port for future extensions
• Ambient temperature: -5°C to +45°C
• Relative humidity: 0 % to 95% (noncondensing)
• Storage temperature: -40°C to +70°C
• Type of ingress protection: IP 20
• Flame resistance UL94 V0-5VB
• Wall-mountable, mechanically compatible to RFP 42 WLAN
• Colour: ice grey
• Weight: 467 g (without AC adapter)
• Dimensions (W x H x D): 195 x 200 x 30 mm (without antenna)

Part Numbers
• RFP 43 WLAN 68636